Acquisition of toll processor, organic growth opens new doors for an Ohio service center
Acquisition of toll processor, organic growth opens new doors for an Ohio service center
April 2019 - As the roots of a seedling grow and spread in the soil, they encounter obstacles such as rocks that block their way. British researchers found that roots have a growth control mechanism that enables them to detour around obstacles and to elongate when their path is clear. It also explains how seedlings are able to grow so quickly once they have established, the scientists determined.
In much the same way, Liberty Steel Products, based in North Jackson, Ohio, is finding ways to reach further than ever through the metals ecosystem.
The Weller family founded the company in 1965 and continues to own it today. Since its modest beginning, the company operates slitting, cut-to-length and blanking lines in two Ohio locations, with a combined 250,000 square feet under roof.

During 2013, Liberty launched a building products division that has since grown in volume to over 40,000 tons annually, serving 125 customers. In 2016, Liberty purchased one of its largest customers, Welded Tubes of Orwell, Ohio, which specializes in high-quality, small-diameter tubing for the automotive industry. Welded Tube provides Liberty with downstream value-added processes.
In the past four years, Liberty has doubled in size, in terms of tons sold, even before its latest acquisition, Mississippi Steel Processing (MSP), a transaction that closed in October, according to President and CEO Jim Grasso.
The carbon flat-rolled coil, sheet and strip products Liberty Steel sells include hot-rolled, cold-rolled, coated and pre-painted steels. Its four slitters manage incoming coils from 24 to 72 inches wide, weighing up to 30 tons, and gauges from 0.01 to 0.17 inch. Three cut-to-length lines manage light to heavy gauges (up to 0.375 inch thick). Among its niche product lines is PVQ (pressure vessel quality) steel.
“Our strength is the ability to sell and process a wide range of products, which gives us a large potential customer base,” says Joe Wilson, vice president of Building Products and Strategic Planning.
“Our service center and building products businesses sell and ship a combined 30,000 tons per month; that does not include MSP’s tonnage. Liberty Steel before MSP was nearly 100 percent direct-to-market sales. Toll processing was not a major focus,” says Wilson. MSP is a toll processor. “That’s one of the reasons we were attracted to MSP: to enter the market for toll processing.”
“We buy mill direct from domestic producers as much as we can; it’s important to us to support those partnerships. We do purchase a small percentage of foreign material for the building product business, depending on the product and target market,” according to Wilson.

The company sells to more than 500 customers most years, through both businesses. The service centers distribute products into such end markets as office furniture, lawn and garden, tubing, tanks and cylinders, shelving and racking systems. With building products, “we are selling mainly to regional roll formers that make roofing and siding for residential and commercial buildings, garage doors and other building components.”
Merger opportunity
A couple years ago, says Grasso, Liberty Steel’s leadership team was working on long-term planning when discussion evolved as to how northeast Ohio was saturated with regional competitors and freight costs made it difficult to ship material to customers in the South at a competitive price.
“We reached out to customers and other industry contacts, and MSP’s name surfaced a few times. Upon exhaustive negotiations, Liberty secured a majority interest,” Grasso says.
MSP began during 2011 as a toll processor on the campus of Severcorr in Columbus, Mississippi. When Steel Dynamics Inc. purchased those assets, it moved more toward light-gauge, value-added products, so MSP’s processing capabilities were not directly aligned with what the upgraded Columbus Works were producing.
“We knew MSP had to expand its capabilities and focus on more than just heavy-gauge products,” Grasso says. “We installed a new light-gauge slitter that began processing material during fourth-quarter 2018. The line adds capacity to handle the needs of the mill and the regional market—light-gauge Galvalume, galvanized and pre-paint material.”
The company has also ordered a stretcher leveler that is slated for installation during fourth-quarter 2019. The stretcher—which will also have edge-trimming capabilities—is designed to handle up to 5⁄8-inch-thick material at 80,000 yield and 1⁄2-inch-thick at 100,000 yield.
“We are excited about MSP,” Grasso says, which has the capacity to toll process 750,000 tons a year. “This greatly expands our overall capabilities, and we are building a strong team to provide timely processing and focus on growth in the Southeast market.” Operations at MSP now include three slitters and two cut-to-length lines.

Cut-to-length and blanking are among the services performed by Liberty Steel Products.
Multi-part potential
Grasso says the location of MSP presents distinct new customer-based opportunities for the company as a whole. “First is toll processing for the mill and direct buyers. We are processing 30,000 to 35,000 tons per month, and that is growing since we’ve been involved.
“We are also establishing a sales team to solicit business for Liberty Steel in the South. We brought on new customers and successfully executed initial orders. Third, we are using the Southern facility to store coils for our building products business. MSP has 250,000 square feet under roof, and we are adding 20,000 square feet of storage and packaging for the new light-gauge slitter.”
“The geography,” says Wilson, “is important for both Liberty Steel and MSP’s customers. Considering freight costs, being on the mill campus is a huge advantage.” With the addition of the stretcher-leveler and light-gauge slitter, MSP positions both companies for long-term growth. “We are listening to what the market and our customers need to be successful. That’s the main factor in our decision to add new equipment.”
Liberty Steel’s service center and building products businesses are well established in the Northeast and Midwest, he says, but now we will “also move further into the Southeast, using our supplier partnerships to help us expand into markets that we once found unreachable.”
Notes Grasso, “We are not done. We are focused on doubling our building products business in the next five years,” and the Southeast market figures prominently in those growth plans.
“As our existing service center customers expand with their own facilities in the South, we see a lot of manufacturing growth in the region. With MSP, we can build business there,” says Wilson. MM

